Accessories
This section contains the components necessary
to connect to the vehicle CAN bus via the OBD Port. The following
devices are covered:
•
Kvaser USB to CAN interface
•
Kvaser WiFi to CAN interface
• OBD Extension Cable
• OBD Breakout Box
• Dsub9 connector to OBD connector
• Dsub9 connector to banana plugs for Breakout Box
|
OBD Extension Cable
Allows Easy access to the OBD port for diagnostic
tools from outside of the vehicle. Length 5 meters. Rugged
casing.
|
|
Click to enlarge
|
| |
OBD Breakout Box
Allows access to all the pins of the OBD
connector. Used with connector options with banana plugs,
e.g. Dsub9 or Oscilloscope connectors. Pin 6 is CAN High,
Pin 14 is CAN Low.
|
|
Click to enlarge
|
Dsub9
connector to OBD connector
Provides easy connection to some of the CAN
to USB interfaces that are delivered with a Dsub9 connector.
Pin 2 is CAN Low, Pin 7 is CAN High.
|
|
Click to enlarge |
Dsub9
connector to banana plugs for Breakout Box
Another means of accessing the OBD connector
with equipment provided with Dsub9 connectors.
|
|
Click to enlarge
|
|
X-Analyser CAN data analysis tool kit
with access cables and breakout box. This is a tool that will identify
the CAN frames and allow the access to the data within the frames.
Silver Scan On Board Diagnostics (OBD) Tool.
Manufactured by RA Consulting, this is an essential OBD diagnostics
tool.
Interfaces – Choose from several interface
options for the above tools.
|
Accessories for accessing the CAN bus.
We have OBD extension cables, OBD connection adaptors, OBD connector
break out boxes, etc.
|
CAN bus fault finding Training. This
training will give you an insight on how the CAN bus works, and
how to access it for trouble shooting.
|
Technical
Info
Articles on CAN theory and troubleshooting
techniques. We have done for various publications in the past (including
Aftermarket magazine and Professional Motor Mechanic magazine).
|
|
